100C 6S1P 22.8V 8000mAh FPV Battery | XT60 Option

100C 6S1P 22.8V 8000mAh FPV Battery Overview

100C 6S1P 22.8V 8000mAh FPV Battery is designed for FPV drone platforms that require strong burst output, larger onboard energy reserve, and practical repeat-flight efficiency on a 6S architecture. With a 6S1P configuration, 22.8V nominal voltage, 8000mAh capacity, and 100C discharge capability, this model is positioned as a high-rate FPV battery for larger FPV builds that need more reserve than common 5000mAh packs. It supports up to 2C charging, weighs approximately 1034g, and offers a cycle life of no less than 300 cycles.

The 100C 6S1P 22.8V 8000mAh FPV Battery is not a compact freestyle pack. Its value comes from combining a 100C discharge rate with a larger-capacity 8000mAh format, which changes the flight logic from short aggressive sessions to stronger sustained power confidence across larger FPV airframes. That makes it especially suitable for pilots and integrators who want more useful flight reserve while still keeping strong throttle response and direct power delivery.

Why the 100C 6S1P 22.8V 8000mAh FPV Battery Fits 10 Inch FPV Drones

Among the target platforms, 10 inch FPV drones are the clearest primary fit for this battery. In this class, the aircraft usually needs more energy reserve than a compact 6S 5000mAh pack can provide, but the pilot still expects confident punch during acceleration, recovery, and loaded flight. A battery that is too small may feel sharp at first but leave too little flight margin, while a battery that has capacity without discharge strength can make the platform feel dull under throttle.

The 100C 6S1P 22.8V 8000mAh FPV Battery fits this role well because it adds meaningful reserve without giving up high-rate FPV behavior. That makes it suitable for 10 inch FPV drones used in longer-range flying, repeated route-style FPV sessions, or heavier setup combinations where the pilot wants more confidence under load. Customers comparing broader UAV battery solutions can position this model as a larger-capacity FPV option for pilots who need both punch and reserve in one pack.

Suitable for 8 Inch X8 FPV and Hexacopter FPV Platforms

This battery is also highly relevant for 8 inch X8 FPV drones and hexacopter FPV platforms. These aircraft often have a more complex power demand profile than standard quad builds because they may use more motors, wider frame layouts, or more distributed thrust loading. In these systems, stable current delivery is critical, especially when the aircraft makes repeated throttle changes or needs confident lift recovery after directional adjustment.

The 100C 6S1P 22.8V 8000mAh FPV Battery supports that logic by combining a larger pack format with strong 100C discharge capability. It is suitable for 8 inch X8 and six-rotor FPV builds that need more reserve than compact packs can offer but still want a responsive feel under dynamic control input. Instead of chasing maximum hover time, this battery is better positioned for larger FPV systems that need reliable output behavior over a longer flying cycle.

Fit for 13 Inch Carbon Frame and 15 Inch FPV Drones

For 13 inch carbon frame FPV drones and 15 inch FPV platforms, this battery works as a power-and-reserve solution rather than a lightweight agility pack. Larger FPV frames can place more sustained load on the power system during climb, transition, acceleration, and recovery, especially when the aircraft uses bigger propellers or more aggressive tuning. In this kind of platform, stronger reserve can improve flight confidence and reduce the feeling of running out of useful power too early.

The 100C 6S1P 22.8V 8000mAh FPV Battery is therefore suitable for 13 inch and 15 inch FPV builds that want a 6S format with more capacity than standard packs. It gives the aircraft more usable flight reserve while still preserving strong discharge behavior for demanding throttle input. This makes it better suited to larger FPV airframes than smaller-capacity 6S options that prioritize minimum weight above all else.

Charging Workflow, Connector Flexibility, and Integration Value

The 2C charging capability helps improve repeat-flight efficiency for pilots who need quicker turnaround between sessions. While it should not be described as an industrial fast-charge field battery, it still provides practical value for FPV users running multiple flights in one day. For charging workflow matching, customers can also evaluate compatible drone battery chargers as part of a complete setup.

The body size of 76(T) × 48(W) × 150(H) mm gives this battery practical integration value across larger FPV frames. In FPV builds, battery size affects top-plate space, strap placement, center of gravity, and airframe balance. XT60 is a common market connector for this class, while the final connector can still be customized according to customer requirements. For more product case videos and application updates, please visit our social media channels.

100C 6S1P 22.8V 8000mAh FPV Battery Summary

Overall, the 100C 6S1P 22.8V 8000mAh FPV Battery is a high-rate FPV power solution for 10 inch FPV drones, 8 inch X8 FPV drones, hexacopter FPV platforms, 13 inch carbon frame FPV drones, and 15 inch FPV builds that need stronger burst output and more reserve than compact FPV packs can provide. With 100C discharge, 2C charging, 8000mAh capacity, approximately 1034g pack weight, and ≥300 cycle life, it is especially suitable for FPV applications that prioritize punch, usable reserve, and repeat-flight efficiency.