Herewin 100C 8S1P 30.8V 10000mAh Semi-Solid LiHV FPV Battery

30.8V 10Ah 100C FPV Battery is a high-discharge semi-solid LiHV battery designed for professional FPV drones and specialized UAV platforms requiring strong power output and an 8S high-voltage system. Featuring a 100C discharge rating, 8S1P configuration, 30.8V nominal voltage, and 10000mAh capacity, this battery is suitable for compatible heavy-duty FPV drones, patrol UAVs, and inspection and mapping applications.

30.8V 10Ah 100C FPV Battery Overview

The Herewin P1343126KU combines semi-solid lithium battery technology with an 8S LiHV power platform. Each cell has a nominal voltage of 3.85V, providing a battery pack voltage of 30.8V.

With a net weight of approximately 1440g and compact dimensions of 61 × 75 × 178mm, this model provides 10000mAh capacity for professional FPV platforms requiring high discharge capability and substantial onboard energy reserves.

Its main advantage is the 100C high-discharge rating, making it particularly relevant for drone systems with demanding short-duration power requirements. Actual peak discharge current and allowable duration should be verified against the approved battery specifications.

100C High Discharge for Powerful FPV Performance

The key selling point of the 30.8V 10Ah 100C FPV Battery is its high-discharge capability. FPV drones can experience rapid changes in power demand during takeoff, climbing, acceleration, and dynamic flight maneuvers.

The 100C discharge rating makes this battery a candidate for high-power FPV platforms where strong current delivery is an important performance requirement.

For larger FPV aircraft, an appropriate high-discharge battery can help support propulsion systems that experience substantial transient electrical loads.

However, the actual current delivered depends on the battery’s verified discharge limits, connector ratings, cable specifications, electronic speed controllers, and motor configuration. The 100C rating should not be interpreted as an unlimited continuous-current specification.

Designed for 10-Inch and Larger Heavy-Duty FPV Drones

The 30.8V 10Ah 100C FPV Battery is intended for evaluation in compatible 10-inch and larger heavy-duty FPV platforms rather than lightweight racing drones.

Its 10000mAh capacity provides an energy reserve for professional FPV operations, while the 8S LiHV architecture offers a higher nominal voltage than conventional 6S configurations.

With a battery weight of 1440g, this model requires an airframe capable of carrying a relatively large battery pack. It is especially important to evaluate motor thrust, propeller size, frame strength, maximum takeoff weight, and battery mounting space.

Not every 10-inch FPV drone supports an 8S battery system. Electrical and mechanical compatibility must be confirmed before installation.

8S Semi-Solid LiHV Technology with a 3.85V Cell Platform

This battery uses a semi-solid LiHV platform with a nominal cell voltage of 3.85V. The 8S1P configuration provides 30.8V nominal voltage, making it suitable for UAV power systems designed specifically for higher-voltage lithium batteries.

Compared with the 6S 23.1V version of the same battery series, the 8S configuration offers a higher nominal voltage and greater energy storage at the same 10Ah capacity.

In a properly matched power system, a higher operating voltage can reduce the current required to deliver the same electrical power. This can be useful for UAV manufacturers developing higher-voltage propulsion architectures.

The aircraft’s electronic speed controllers, motors, power distribution components, and charging equipment must support the battery’s 8S LiHV voltage profile.

High-Power Battery Option for Patrol UAVs

Patrol drones may be used for perimeter monitoring, route observation, security inspection, and specialized aerial surveillance missions. These platforms often require a suitable balance between battery capacity and available propulsion power.

The 30.8V 10Ah 100C FPV Battery provides a high-voltage energy source for compatible patrol UAVs requiring additional current capability during takeoff, climbing, or maneuvering.

Its 10000mAh capacity can also be considered during mission endurance planning, although actual flight time depends on aircraft weight, propulsion efficiency, payload equipment, and operating conditions.

Suitable for Inspection and Mapping UAV Platforms

Inspection and mapping UAVs are used for infrastructure observation, aerial surveying, route inspection, and geospatial data collection. Some platforms require additional power reserve when operating with specialized onboard equipment or performing repeated takeoff and climbing operations.

The 30.8V 10Ah 100C FPV Battery can be evaluated for inspection and mapping UAV systems designed around an 8S LiHV electrical architecture.

While the 100C discharge rating provides a high-power characteristic, typical mapping missions may not require such a high discharge rate. The suitability of this battery should be assessed according to aircraft power demand, battery weight, and mission duration.

Compact 8S Battery Structure for Professional UAV Integration

With dimensions of 61(T) × 75(W) × 178(H) mm and a net weight of 1440g (±100g), the battery offers a rectangular structure for compatible FPV and professional UAV installations.

Battery integration should consider available mounting space, vibration resistance, secure attachment, center of gravity, and cable routing.

Connector selection is especially important for high-discharge applications. The final connector, cable size, and electrical configuration should be selected according to verified continuous and peak current requirements rather than the C-rate alone.

1C Charging and Battery Operating Requirements

The Herewin P1343126KU supports a maximum charging rate of 1C and has a specified cycle life of at least 300 cycles.

Charging equipment must support the appropriate 8S LiHV battery voltage profile and approved charging current. Operators should follow the specified charging limits and battery protection requirements.

Before selecting this battery, customers should confirm their UAV frame size, motor and ESC specifications, expected continuous current, peak current, connector requirements, and target flight conditions.

Explore More Herewin UAV Battery Solutions

For other UAV power requirements, explore our high energy density UAV battery solutions or browse our drone battery chargers for suitable charging equipment.

For FPV battery demonstrations, product updates, and professional UAV application videos, follow Herewin on YouTube, connect with us on LinkedIn, or explore our updates on Instagram.