High Voltage Semi-Solid 12S1P 46.8V 28500mAh UAV Battery | 310Wh/kg

High Voltage Semi-Solid 12S1P 46.8V 28500mAh UAV Battery Overview

High Voltage Semi-Solid 12S1P 46.8V 28500mAh UAV Battery is designed for industrial drone platforms that require a compact high-voltage battery structure, lightweight pack design, and practical long-endurance performance for mission-oriented work. With a 12S1P configuration, 46.8V nominal voltage, 28500mAh capacity, and 310Wh/kg high energy density, this model is positioned as a high-voltage semi-solid UAV battery for aircraft that need better energy-to-weight efficiency than conventional packs in the same size class. It supports up to 10C discharge, 1C charging, weighs approximately 4.70kg, and offers a cycle life of no less than 100 cycles.

The High Voltage Semi-Solid 12S1P 46.8V 28500mAh UAV Battery belongs to a high-voltage platform built on 3.85V–3.95V cells, so its value is not only in capacity. It also comes from higher system voltage, practical output under working load, and efficient use of battery mass in compact-to-mid-size UAV platforms. This makes it more suitable for aircraft that need longer single-mission duration and stable electrical matching, rather than systems built around dense daily pack rotation and fast charging.

Why the High Voltage Semi-Solid 12S1P 46.8V 28500mAh UAV Battery Fits Patrol Missions

Among the target scenarios, patrol and surveillance work is the clearest primary direction for this model. In perimeter observation, corridor patrol, facility inspection support, low-altitude security missions, and repetitive monitoring routes, the aircraft often carries cameras, thermal devices, communication modules, or other lightweight task payloads. In these missions, battery weight directly affects loiter time, while voltage platform matching influences how smoothly the aircraft maintains cruise power and route consistency.

The High Voltage Semi-Solid 12S1P 46.8V 28500mAh UAV Battery fits this mission logic well because it combines a 4.70kg pack weight with useful 28.5Ah reserve and a 12S high-voltage structure. Compared with smaller lower-series batteries, it gives the aircraft more working margin without immediately pushing the platform into a larger battery class. That makes it suitable for perimeter patrol, corridor observation, route巡逻, facility monitoring, and low-altitude surveillance work where the goal is stable airborne duration rather than short-burst power output. Customers comparing broader industrial UAV battery solutions can position this model as a higher-voltage option for compact patrol UAV platforms.

Route Logistics Use for Controlled Payload Platforms

This battery is also well suited to route logistics, but its logistics role is more specific than larger cargo batteries. It is better aligned with controlled-payload delivery aircraft that need a stable 12S power architecture and practical mission endurance without carrying oversized battery weight. In medical sample transfer, small spare-parts dispatch, industrial-park delivery, campus distribution, and short-range cross-site transport, a battery with moderate mass and useful reserve can improve sortie continuity.

The High Voltage Semi-Solid 12S1P 46.8V 28500mAh UAV Battery is therefore appropriate for route logistics platforms that operate above the very light class but below cargo UAV systems. Its 10C discharge capability supports dependable takeoff and climb under practical route loads, while the 310Wh/kg design helps preserve better payload allowance within a compact airframe. This makes it more suitable for repeated controlled-payload route missions than for heavy freight operations.

Suitable for Compact Cleaning Platforms with 12S High-Voltage Matching

This model can also support compact cleaning UAV systems, especially platforms that need better voltage support than very small packs can provide. In localized façade cleaning, roof cleaning, and solar panel maintenance, the aircraft must hover steadily while carrying pumps, hoses, or spray tools, but excessive battery mass will quickly reduce maneuverability and practical working time. In this use case, a lighter high-energy battery can improve working continuity more effectively than simply using a bulkier pack.

The High Voltage Semi-Solid 12S1P 46.8V 28500mAh UAV Battery fits this requirement by combining practical energy reserve with a 12S high-voltage architecture and a controlled 4.70kg pack weight. It is better suited to compact cleaning platforms that need stronger electrical headroom and longer hovering windows than lower-series packs can provide, but do not require the size and mass of medium-duty cleaning battery systems. For charging workflow matching, customers can also evaluate compatible drone battery chargers as part of a standard setup.

Integration Value and Product Positioning

The body size of 115(T) × 117(W) × 182(H) mm gives this battery strong integration value in compact industrial UAV design. In patrol aircraft, internal space is shared by camera mounts, antennas, and communication modules. In logistics drones, payload compartments reduce layout flexibility. In compact cleaning systems, pumps and working modules compete for available installation space. A semi-solid battery with controlled dimensions and a higher-voltage 12S structure can simplify installation and help improve center-of-gravity planning across these different platform types.

The cycle life of ≥100 cycles should be evaluated realistically in project planning. This product is better suited to applications that prioritize lightweight high-energy performance and efficient mission duration over intensive high-rotation service schedules. Overall, the High Voltage Semi-Solid 12S1P 46.8V 28500mAh UAV Battery is best positioned as a compact high-voltage solution for patrol UAVs, controlled-payload route logistics platforms, and compact cleaning systems that need balanced endurance and stable mission operation.