Herewin 3C 14S1P 51.8V 30000mAh Anode-Free UAV Battery | 495Wh/kg

51.8V 30Ah Anode-Free UAV Battery Overview

51.8V 30Ah Anode-Free UAV Battery is developed for professional drone platforms requiring high energy density, reduced battery weight, and extended mission endurance. Featuring a 14S1P configuration, 51.8V nominal voltage, 30000mAh capacity, 3C discharge capability, and 495Wh/kg high energy density technology, this battery is particularly suitable for patrol drones, inspection and mapping UAVs, and long-endurance aerial platforms.

Built with advanced anode-free lithium alloy battery technology, this UAV power solution focuses on achieving a higher energy-to-weight ratio than conventional battery platforms. With a net weight of approximately 3370g and a compact 157 × 79 × 196mm structure, it offers a practical option for UAV manufacturers developing lightweight aircraft with demanding endurance requirements.

495Wh/kg High Energy Density for Extended UAV Endurance

The main advantage of the 51.8V 30Ah Anode-Free UAV Battery is its 495Wh/kg high energy density technology. In professional UAV applications, battery weight plays a critical role in aircraft efficiency, payload allocation, and available flight time.

By combining anode-free technology with a 30000mAh energy reserve, this battery supports UAV designs that prioritize energy storage without excessive battery weight. Its 14S high-voltage configuration provides an additional integration option for drones designed around higher-voltage power systems.

This makes the battery particularly relevant for endurance-focused UAV projects, where steady power demand and efficient energy utilization are more important than extreme discharge performance. Actual flight endurance depends on the aircraft configuration, payload, propulsion efficiency, and mission conditions.

Ultra-Lightweight Power for Patrol Drone Applications

Patrol drones are often required to perform extended aerial observation, route monitoring, perimeter inspection, and security surveillance missions. These applications benefit from lightweight battery systems that allow the aircraft to remain airborne for longer periods without unnecessarily increasing takeoff weight.

The 51.8V 30Ah Anode-Free UAV Battery combines 30Ah capacity with a 3370g battery pack, providing an attractive energy-to-weight configuration for compatible patrol UAV platforms.

Its 3C discharge capability makes it suitable for UAV missions with moderate and predictable power demands, including steady cruising and planned patrol routes. This product is not intended for extreme burst-current requirements or heavy-lift applications.

Designed for Inspection and Mapping UAVs

Inspection and mapping drones are widely used in aerial surveying, terrain mapping, infrastructure inspection, and geospatial data collection. These applications often require consistent flight performance over predetermined routes while carrying cameras, mapping sensors, or other lightweight equipment.

The 51.8V 30Ah Anode-Free UAV Battery provides a high-energy-density power option for inspection and mapping platforms that require a 14S battery system.

Its lightweight structure can help UAV manufacturers optimize aircraft weight distribution and available energy capacity. For aerial mapping missions that require extensive flight coverage, the 30Ah capacity offers an energy reserve suitable for evaluation in long-endurance aircraft designs.

Long-Endurance UAV Battery with 14S High-Voltage Architecture

Long-endurance UAV platforms require careful balancing of battery capacity, total aircraft weight, operating voltage, and propulsion efficiency. The 51.8V 30Ah Anode-Free UAV Battery is designed around these requirements.

Compared with lower-voltage configurations, the 14S1P 51.8V platform provides compatibility with UAV power systems designed for higher nominal battery voltage. When properly matched with the propulsion system, this architecture can support efficient power distribution and endurance-focused aircraft integration.

The anode-free lithium alloy battery platform is especially relevant for UAV manufacturers investigating advanced high-energy-density power solutions for specialized aerial missions.

Compact Structure for UAV Battery Integration

With dimensions of 157(T) × 79(W) × 196(H) mm and a net weight of 3370g (±100g), the battery offers a compact form factor for compatible UAV installations.

The battery compartment, mounting structure, cable routing, and aircraft center of gravity should be evaluated during integration. Connector options such as XT90S, AS150U, or QS8 may be considered according to the aircraft’s current requirements and electrical design.

Final connector selection and battery integration details can be customized following engineering evaluation.

3C Discharge and Controlled Charging

The battery features a 3C discharge rating and supports a maximum charging rate of 0.2C. This configuration is primarily intended for endurance-oriented UAV applications with relatively stable power demands.

The 0.2C charging limit requires a controlled charging process rather than rapid battery turnaround. Operators should use compatible charging equipment and follow the battery’s specified voltage and charging requirements.

Before selecting this battery, UAV manufacturers should confirm the aircraft’s operating current, peak power requirements, payload weight, target endurance, and charging strategy.

Explore More Herewin UAV Battery Solutions

Explore our high energy density UAV battery solutions for additional lightweight power options, or browse our drone battery chargers for compatible charging solutions.

For battery technology updates, product demonstrations, and professional UAV application content, follow Herewin on LinkedIn, watch our videos on YouTube, or explore our latest updates on เฟสบุ๊ค, Instagram, and TikTok.