100C 6S1P 22.2V 5000mAh FPV Battery | XT60 Option

100C 6S1P 22.2V 5000mAh FPV Battery Overview

100C 6S1P 22.2V 5000mAh FPV Battery is designed for FPV drone platforms that require strong burst output, fast throttle response, and practical repeat-flight efficiency. With a 6S1P configuration, 22.2V nominal voltage, 5000mAh capacity, and 100C discharge capability, this model is positioned as a high-rate FPV battery for pilots and integrators who need more aggressive power delivery than general-purpose drone packs can provide. It supports up to 2C charging, weighs approximately 760g, and offers a cycle life of no less than 400 cycles.

The 100C 6S1P 22.2V 5000mAh FPV Battery is built around FPV flying logic rather than long-endurance industrial mission logic. Its value comes from high burst discharge, compact pack structure, and practical turnaround between flights. That makes it suitable for FPV systems where punch, response, and frame matching are more important than simply extending cruise duration. XT60 is a common connector choice for this class, while the final connector can still be selected according to customer requirements.

Why the 100C 6S1P 22.2V 5000mAh FPV Battery Fits 7 Inch and 10 Inch FPV Drones

Among the target platforms, 7 inch and 10 inch FPV drones are the clearest primary fit for this battery. In 7 inch FPV builds, pilots usually care about burst response, stable punch after throttle changes, and practical balance between weight and usable pack capacity. A pack that is too heavy can reduce agility, while a pack that is too weak in discharge can make the drone feel soft during acceleration and recovery. The 100C 6S1P 22.2V 5000mAh FPV Battery addresses this by offering strong high-rate output in a compact 760g format.

In 10 inch FPV platforms, the role changes slightly. These frames often need more reserve for larger propellers, wider flying envelopes, or slightly heavier onboard payload setups. Here, the 5000mAh capacity gives useful support for repeated flight sessions while the 100C discharge rate keeps throttle response direct and confident. Customers comparing broader UAV battery solutions can position this model as a dedicated FPV option for builds that need stronger power response rather than general industrial endurance logic.

Suitable for 8 Inch X8 FPV and Hexacopter FPV Platforms

This battery is also highly relevant for 8 inch X8 FPV drones and six-rotor FPV platforms. These aircraft usually follow a different design logic from conventional freestyle quads. They may use more motors, different frame geometry, or more complex payload balance, so the battery must support stable current delivery under more distributed load conditions. In these systems, strong discharge capability is important because the aircraft may demand more immediate power during lift changes, positioning correction, and route acceleration.

The 100C 6S1P 22.2V 5000mAh FPV Battery fits this logic well because it prioritizes discharge response first. It is suitable for 8 inch X8 FPV layouts and hexacopter FPV builds that need reliable burst support and practical pack size without moving into oversized battery formats. This gives integrators more freedom to match the battery with different FPV frame architectures where current response matters more than long-hover efficiency.

Fit for 13 Inch T Carbon FPV and 15 Inch FPV Builds

For 13 inch T carbon FPV drones and 15 inch FPV platforms, this battery is better understood as a power-oriented option rather than a maximum-endurance option. Larger FPV frames can place more load on the battery during acceleration, lift recovery, and aggressive maneuvering, especially when the aircraft is configured for more demanding propeller setups. In these builds, the battery must provide enough burst support to keep the aircraft responsive and controllable.

The 100C 6S1P 22.2V 5000mAh FPV Battery is therefore suitable for larger FPV configurations that still want a 6S 5000mAh format with strong discharge capability. It is not intended to be described as a heavy industrial pack. Its role is to support larger FPV frames with more confident throttle response and more direct output under dynamic flying conditions.

Charging Workflow, Connector Flexibility, and Integration Value

The 2C charging capability helps improve repeat-flight efficiency for users who need quicker turnaround than standard low-rate charging workflows. While it is not meant to be framed as an industrial fast-charge field battery, it still offers a practical advantage for FPV users running multiple flights in one session. For charging system matching, customers can also evaluate compatible drone battery chargers as part of a complete setup.

The body size of 56(T) × 48(W) × 150(H) mm gives this battery practical integration value across different FPV frame sizes. In FPV builds, battery placement affects center of gravity, top-plate space, strap position, and frame balance. A compact 6S 5000mAh pack with strong discharge capability gives pilots more flexibility in frame matching. XT60 is a common market connector for this size and voltage class, while the actual connector can be adjusted according to customer requirements. For more product case videos and application updates, please visit our social media channels.

100C 6S1P 22.2V 5000mAh FPV Battery Summary

Overall, the 100C 6S1P 22.2V 5000mAh FPV Battery is a high-rate FPV power solution for 7 inch FPV drones, 8 inch X8 FPV drones, 10 inch FPV drones, hexacopter FPV platforms, 13 inch T carbon FPV drones, and 15 inch FPV builds that need strong burst output and direct response. With 100C discharge, 2C charging, 5000mAh capacity, approximately 760g pack weight, and ≥400 cycle life, it is especially suitable for FPV applications that prioritize punch, response, and repeat-flight efficiency.