100C 8S1P 31.6V 9500mAh FPV Battery | XT60 Option

100C 8S1P 31.6V 9500mAh FPV Battery Overview

100C 8S1P 31.6V 9500mAh FPV Battery is designed for FPV drone platforms that require strong burst output, larger onboard reserve, and a higher-voltage power structure for demanding larger-frame flying. With an 8S1P configuration, 31.6V nominal voltage, 9500mAh capacity, and 100C discharge capability, this model is positioned as a high-rate FPV battery for pilots and integrators who need more reserve than standard 5000mAh, 7500mAh, or 8500mAh FPV packs. It supports up to 1C charging, weighs approximately 1300g, and offers a cycle life of no less than 100 cycles.

The 100C 8S1P 31.6V 9500mAh FPV Battery is not a compact freestyle battery. Its product logic is clearly built around larger FPV airframes that need stronger voltage support, larger usable energy, and more relaxed reserve margins during repeated throttle events. Compared with smaller 6S or 8S packs, this version is better suited to pilots who want the aircraft to keep feeling confident through longer power sections instead of only delivering sharp response at the beginning of the flight.

Why the 100C 8S1P 31.6V 9500mAh FPV Battery Fits 13 Inch Carbon Frame and 15 Inch FPV Drones

Among the target platforms, 13 inch carbon frame FPV drones and 15 inch FPV drones are the clearest primary fit for this model. In these larger airframes, the battery has to support more than just takeoff punch. It also has to keep the aircraft responsive during longer throttle pulls, sustained climb, lift recovery, and repeated power demand under bigger propeller load. When the frame gets larger, the value of extra reserve becomes much more obvious because the aircraft can consume practical battery margin quickly once the flying profile becomes more demanding.

The 100C 8S1P 31.6V 9500mAh FPV Battery fits this role especially well because it combines a 100C discharge rate with a larger 9500mAh reserve on an 8S platform. For 13 inch carbon frame FPV drones and 15 inch FPV builds, that gives a more comfortable balance between strong burst behavior and extended usable power duration. Instead of behaving like a lightweight agility-first pack, this battery is better positioned as a large-frame FPV power pack for pilots who still want direct output under demanding throttle input. Customers comparing broader UAV battery solutions can position this model as a dedicated FPV option for larger builds that need both punch and reserve.

Suitable for 10 Inch FPV Drones Requiring a Bigger Power Window

This battery is also highly relevant for 10 inch FPV drones, but the role here is not lightweight response-first flying. Some 10 inch FPV builds use larger propellers, heavier frame combinations, or more demanding route-style flying where a smaller pack starts to feel limiting too early. In those cases, a larger-capacity 8S battery can provide a more useful working window and a more stable feeling across one complete flight cycle.

The 100C 8S1P 31.6V 9500mAh FPV Battery is therefore suitable for 10 inch FPV drones that prioritize bigger reserve, more stable output, and stronger confidence under repeated load rather than the lightest possible battery setup. It is better positioned for heavy-duty 10 inch FPV builds and larger propeller combinations where the pilot wants stronger reserve without giving up high-rate discharge behavior.

Fit for 8 Inch X8 FPV and Hexacopter FPV Platforms

This model can also support 8 inch X8 FPV drones and hexacopter FPV platforms, where the power demand profile is often more distributed than in a standard quad. In these airframes, the battery must remain reliable during repeated lift correction, directional adjustment, and throttle recovery across more motors. In this kind of system, strong discharge is necessary, but reserve is equally important because the aircraft may remain under meaningful load for longer periods than a compact quad FPV build.

The 100C 8S1P 31.6V 9500mAh FPV Battery fits this application because it offers both strong burst capability and a larger reserve window than smaller 8S packs. It is suitable for X8 FPV and six-rotor FPV builds that need more output confidence, better lift recovery, and more usable energy than standard compact packs can provide. Its role here is stable high-rate FPV performance over repeated demanding flight sections rather than compact freestyle efficiency.

XT60 Connector Demand, Charging Workflow, and Integration Value

XT60 remains a common market connector for this battery class and is a strong practical choice for many FPV users, especially in builds where installers want familiar compatibility and easy sourcing. At the same time, the final connector can still be customized according to customer requirements, so the pack does not need to be limited to only one connector direction. This is especially helpful for integrators working across different FPV frame standards and ESC wiring preferences.

The 1C charging capability means this model is better understood as a reserve-oriented FPV battery rather than a quick-turn session pack. For charging workflow matching, customers can also evaluate compatible drone battery chargers as part of a complete setup. The body size of 105(T) × 45(W) × 139(H) mm gives this battery practical integration value across larger FPV frames, where battery size affects strap placement, center of gravity, and airframe balance. For more product case videos and application updates, please visit our social media channels.

100C 8S1P 31.6V 9500mAh FPV Battery Summary

Overall, the 100C 8S1P 31.6V 9500mAh FPV Battery is a high-rate FPV power solution for 8 inch X8 FPV drones, 10 inch FPV drones, hexacopter FPV platforms, 13 inch carbon frame FPV drones, and 15 inch FPV builds that need strong burst output and larger reserve than standard FPV packs can provide. With 100C discharge, 1C charging, 9500mAh capacity, approximately 1300g pack weight, and ≥100 cycle life, it is especially suitable for larger FPV applications that prioritize punch, stable power delivery, and extended usable reserve within one flight cycle.