100C 8S1P 30.4V 8000mAh FPV Battery

100C 8S1P 30.4V 8000mAh FPV Battery Overview

100C 8S1P 30.4V 8000mAh FPV Battery is designed for FPV drone platforms that require stronger burst output, larger onboard reserve, and more stable high-voltage response than standard 5000mAh and 7500mAh FPV packs. With an 8S1P configuration, 30.4V nominal voltage, 8000mAh capacity, and 100C discharge capability, this model is positioned as a high-rate FPV battery for larger FPV builds that need both punch and longer usable power duration. It supports up to 2C charging, weighs approximately 1400g, and offers a cycle life of no less than 300 cycles.

The 100C 8S1P 30.4V 8000mAh FPV Battery is not a light freestyle battery. Its product logic is clearly oriented toward larger FPV frames that demand stronger voltage support, more reserve under load, and more confident response across longer flight sections. Compared with the 8S 5000mAh and 8S 7500mAh versions, this model gives the aircraft more working margin for larger propeller systems, heavier frame builds, and repeated high-load throttle events.

Why the 100C 8S1P 30.4V 8000mAh FPV Battery Fits 13 Inch and 15 Inch FPV Drones

Among the target platforms, 13 inch carbon frame FPV drones and 15 inch FPV platforms are the clearest primary fit for this model. In these larger airframes, the battery has to do more than provide initial punch. It must also maintain usable output through longer throttle sections, climb transitions, lift recovery, and more demanding propeller load. A smaller-capacity pack can keep the frame lighter, but it may reduce confidence too quickly once the aircraft enters a more power-hungry flight profile.

The 100C 8S1P 30.4V 8000mAh FPV Battery fits this role well because it combines a 100C discharge rate with a larger 8000mAh reserve. For 13 inch and 15 inch FPV drones, this supports stronger sustained confidence during aggressive route flying, heavier propeller loading, or larger-frame power demands. Customers comparing broader UAV battery solutions can position this model as a dedicated large-frame FPV option for builds that need more reserve than 7500mAh packs while still keeping direct power delivery.

Suitable for 10 Inch FPV Drones Requiring More Reserve Than Standard Packs

This battery is also highly relevant for 10 inch FPV drones, but the application logic is different from a lighter performance-oriented pack. In 10 inch FPV builds, some users want more than immediate punch. They also want more flight reserve for repeated route sections, recovery margin under load, or stronger power confidence when the setup is not built around minimum weight. In those cases, a larger-capacity pack can make the platform feel more usable over a longer flying cycle.

The 100C 8S1P 30.4V 8000mAh FPV Battery therefore suits 10 inch FPV drones that prioritize larger reserve and stronger power stability rather than the lightest possible setup. It is better positioned for heavy-duty 10 inch builds, long-session FPV use, and larger propeller combinations where the aircraft benefits from additional energy buffer while still demanding high-rate discharge.

Fit for X8 FPV and Hexacopter FPV Platforms

This model can also support X8 FPV layouts and hexacopter FPV platforms, where the demand profile is often more distributed and more complex than in standard quad builds. These aircraft may require stronger total system confidence during lift correction, directional change, or repeated throttle events, especially when the frame design or propeller setup increases load across the power system. In these conditions, a larger-capacity high-rate battery can provide more stable behavior over a longer cycle.

The 100C 8S1P 30.4V 8000mAh FPV Battery fits this application because it offers both strong burst capability and more reserve than smaller packs in the same 8S class. It is suitable for X8 FPV and hexacopter FPV builds that need more output confidence, longer working sections, and a battery format that supports larger-frame flying logic instead of compact freestyle logic.

Charging Workflow and Integration Value

The 2C charging capability helps improve turnaround efficiency for FPV users who need shorter waiting time between sessions. While it should not be framed as an industrial fast-charge field battery, it still provides practical value for pilots running repeated flights in one cycle. For charging workflow matching, customers can also evaluate compatible drone battery chargers as part of a complete setup.

The body size of 101(T) × 48(W) × 150(H) mm gives this battery practical integration value across larger FPV frames. In FPV builds, battery dimensions affect strap location, top-plate space, center of gravity, and overall frame balance. The 100C 8S1P 30.4V 8000mAh FPV Battery is therefore best understood as a larger-capacity FPV power pack for bigger builds that need both strong burst output and a more generous reserve window. For more product case videos and application updates, please visit our social media channels.

100C 8S1P 30.4V 8000mAh FPV Battery Summary

Overall, the 100C 8S1P 30.4V 8000mAh FPV Battery is a high-rate FPV power solution for 10 inch FPV drones, 13 inch carbon frame FPV drones, 15 inch FPV platforms, X8 FPV layouts, and hexacopter FPV builds that need stronger burst output and more reserve than smaller 8S packs can provide. With 100C discharge, 2C charging, 8000mAh capacity, approximately 1400g pack weight, and ≥300 cycle life, it is especially suitable for larger FPV applications that prioritize punch, power stability, and extended usable reserve within one flight cycle.