{"id":9804,"date":"2026-08-03T01:32:20","date_gmt":"2026-08-03T01:32:20","guid":{"rendered":"https:\/\/www.herewinpower.com\/blog\/electric-motorcycle-battery-performance-why-capacity-alone-isnt-enough\/"},"modified":"2026-08-03T01:32:20","modified_gmt":"2026-08-03T01:32:20","slug":"electric-motorcycle-battery-performance-why-capacity-alone-isnt-enough","status":"publish","type":"post","link":"https:\/\/www.herewinpower.com\/ko\/blog\/electric-motorcycle-battery-performance-why-capacity-alone-isnt-enough\/","title":{"rendered":"Why High-Capacity Electric Motorcycle Batteries Can Underperform: An OEM Evaluation Guide"},"content":{"rendered":"<figure class=\"wp-block-image aligncenter size-large\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1536\" height=\"1024\" src=\"https:\/\/www.herewinpower.com\/wp-content\/uploads\/2026\/08\/image_1785205248-4142cw1v.png\" alt=\"Electric motorcycle battery performance depends on power delivery, thermal management, and BMS as one system.\" class=\"wp-image-9803\" srcset=\"https:\/\/www.herewinpower.com\/wp-content\/uploads\/2026\/08\/image_1785205248-4142cw1v.png 1536w, https:\/\/www.herewinpower.com\/wp-content\/uploads\/2026\/08\/image_1785205248-4142cw1v-768x512.png 768w, https:\/\/www.herewinpower.com\/wp-content\/uploads\/2026\/08\/image_1785205248-4142cw1v-18x12.png 18w\" sizes=\"(max-width: 1536px) 100vw, 1536px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Most electric motorcycle battery discussions\u2014whether in a showroom or an OEM sourcing meeting\u2014start with the same shortcut: <strong>How many amp-hours is the pack?<\/strong> Sometimes it\u2019s framed as kilowatt-hours, sometimes as \u201crange.\u201d The assumption is always the same: more capacity = a better battery.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In real duty cycles, that shortcut breaks fast. Riders and fleets feel launch torque under load, hill-climb stamina, winter power drop, and whether performance stays consistent after months of heat, vibration, and daily charging. That\u2019s why a \u201clong-range\u201d bike can still underperform: weak takeoff, abrupt power limiting mid-ride, cold-weather collapse, or early derating.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For sourcing teams, the distinction is simple: <strong>capacity is what\u2019s stored; performance is what the motorcycle can actually deliver<\/strong>\u2014repeatably, safely, and predictably across temperature and state of charge.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This article is for electric motorcycle OEM product managers, battery\/system engineers, and procurement teams. The goal is practical: an evaluation framework you can drop into an RFQ or supplier scorecard. It is not safety certification or regulatory compliance advice; performance limits and acceptance criteria depend on chemistry, pack architecture, duty cycle, and test conditions.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Capacity vs performance: what actually limits a motorcycle<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Capacity (Ah) tells you how much charge is stored. Energy (Wh) is capacity multiplied by voltage.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But motorcycles don\u2019t run on \u201cstored energy\u201d in the abstract. They run on <strong>delivered power at the terminals<\/strong>, under the exact load your motor controller demands.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A pack can look great on nameplate energy and still disappoint riders in the moments they notice most:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><p>hard launches and overtakes<\/p><\/li><li><p>long hill climbs<\/p><\/li><li><p>hot-weather stop-and-go<\/p><\/li><li><p>cold starts<\/p><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">In practice, the gap between \u201ccapacity on paper\u201d and \u201cperformance in the vehicle\u201d usually comes down to three system constraints:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><p><strong>Power delivery<\/strong>: internal resistance, voltage sag, current limits<\/p><\/li><li><p><strong>Thermal limits<\/strong>: temperature rise, hot spots, cold constraints<\/p><\/li><li><p><strong>BMS behavior<\/strong>: derating logic, SOC accuracy, balancing, diagnostics<\/p><\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">The procurement takeaway is straightforward: electric motorcycle battery performance is determined by the entire battery system\u2014not battery capacity alone.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Power delivery: C-rate, voltage sag, and usable power<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">When an OEM says a bike feels \u201cweak,\u201d the root cause is often electrical, not capacity.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This matters most in real duty cycles that hit the battery repeatedly: delivery fleets with hundreds of stop-start events per day, scooters that climb long grades at partial SOC, or heavy-load two-wheelers where the rider expects the same launch torque at the end of a shift as at the beginning. In those programs, a \u201chigh-capacity\u201d pack that can\u2019t sustain pulse power without sag or early limiting will feel weak\u2014even if the range number looks great on paper.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A useful way to explain it internally is this: capacity tells you how far the bike can go; C-rate tells you how hard the battery can push in the moments that create ride feel. At the pack level, however, C-rate claims are only comparable when the test definition is the same (pulse duration, SOC window, temperature, and cutoff voltage).<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Pack C-rate: the missing test conditions<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Most teams know the definition. The sourcing risk is <em>how the rating is framed and measured<\/em>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At the pack level, you need two numbers\u2014with conditions attached:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><p><strong>Continuous rating<\/strong>: what the pack can sustain without violating voltage, temperature, or life limits.<\/p><\/li><li><p><strong>Peak rating<\/strong>: what the pack can deliver for short bursts, tied to acceleration feel.<\/p><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">If a supplier quotes a claimed \u201chigh C-rate\u201d without stating <strong>duration, temperature, SOC window, and cutoff voltage<\/strong>, it is not a performance spec\u2014it is marketing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Just as important: cell ratings don\u2019t automatically become vehicle performance. Connectors, busbars, fuses, wiring, and BMS current limits can reduce what the pack can actually deliver.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Voltage sag and internal resistance: why \u201csame kWh\u201d can feel weaker<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Even if your cells can theoretically deliver high current, real vehicle performance is bounded by the pack\u2019s effective resistance and the control limits of the system.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At high current, two things happen simultaneously:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><p><strong>Voltage drops at the terminals (voltage sag)<\/strong><\/p><\/li><li><p><strong>Heat rises fast (I\u00b2R losses)<\/strong><\/p><\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">The impact on the motorcycle is immediate:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><p>Less terminal voltage = less power available to the inverter\/controller<\/p><\/li><li><p>More heat = earlier derating, higher aging rate, and larger safety buffers<\/p><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">This is why \u201csame kWh\u201d does not mean \u201csame performance.\u201d Two packs with similar energy can have completely different peak-power capability and different sag behavior.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">What matters in procurement is not an isolated \u201cC\u201d label, but the pack\u2019s <strong>rate capability curves<\/strong> and the resulting <strong>usable power envelope<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><em>Any pack-level number is only meaningful with test conditions attached (SOC window, temperature, pulse duration, cutoff voltage). For clarity, the specific evidence items to request are consolidated in the RFQ\/supplier scorecard checklist below so you can compare bidders on the same basis.<\/em><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Thermal management: the performance limiter you feel later<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Even a battery with excellent power capability can\u2019t sustain that performance without proper thermal management.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In practice, the harshest two-wheeler scenarios are often simple: hot soak (after the pack and enclosure have stabilized to a high ambient) plus stop-and-go traffic, repeated hill pulls, and cold starts or cold soak (after stabilization to a low ambient) where resistance spikes and voltage sag shows up immediately. Those are the conditions you want reflected in supplier test evidence\u2014not just a mild ambient bench run.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Thermal management is often the limiter you don\u2019t see until the bike is in riders\u2019 hands. In supplier qualification terms, that\u2019s a warning sign: if the pack can\u2019t stay inside its thermal envelope in your duty cycle, the power you validated on a mild bench test won\u2019t be the power customers experience in the field.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Here\u2019s the chain that connects temperature to rider-perceived performance:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Temperature rise \u2192 higher internal resistance \u2192 more voltage sag \u2192 earlier derating \u2192 less usable power<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That\u2019s why thermal design isn\u2019t a \u201creliability extra.\u201d It directly defines the usable power envelope your rider experiences.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">One helpful way to evaluate suppliers is to separate <strong>passive vs active thermal management<\/strong> at the pack level. Passive approaches rely on enclosure design, conduction paths, and airflow (including simple fan-assisted air cooling) to move heat out, but they have limited control authority. Active systems add closed-loop control\u2014most commonly liquid cooling for heat rejection in high-load or fast-charge programs, and preheating (e.g., heaters or heat-pump integration) to reduce cold-start resistance and voltage sag. The right architecture depends on your duty cycle and ambient extremes, but the key is that each \u201ctier\u201d changes how predictable performance remains across seasons.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A review in the Royal Society of Chemistry discusses how inadequate thermal control can reduce efficiency, accelerate aging, and increase safety risk; see <a target=\"_blank\" rel=\"nofollow noopener\" class=\"link\" href=\"https:\/\/pubs.rsc.org\/en\/content\/articlehtml\/2025\/cc\/d4cc05619a\"><strong>Thermal management challenges in lithium-ion batteries<\/strong><\/a>.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Hot and cold: different physics, same sourcing risk<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">High temperature and low temperature create different engineering problems, but the procurement risk is the same: <strong>performance becomes unpredictable<\/strong>.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><p>In hot conditions, repeated high current raises cell temperature and speeds degradation.<\/p><\/li><li><p>In cold conditions, internal resistance rises, voltage sag gets worse, and the pack hits limits earlier\u2014so the rider feels reduced torque and top speed.<\/p><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Think of temperature as an invisible \u201cmultiplier\u201d on resistance and aging. A system that feels fine in a mild lab test can behave very differently in summer heat soak or winter starts.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For two-wheelers, the common \u201cbad surprise\u201d is not catastrophic failure. It\u2019s derating: the vehicle still runs, but it no longer meets the performance customers were sold.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Temperature uniformity and hot spots<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Average pack temperature can look fine while a corner runs much hotter.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Hot spots matter because the hottest cells age fastest, imbalance grows, and the BMS has to protect the weakest group\u2014reducing usable power for the whole pack.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">To validate it, ask for:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><p>module-level temperature mapping under sustained load<\/p><\/li><li><p>sensor placement vs predicted hot spots<\/p><\/li><li><p>the exact thresholds that trigger derating<\/p><\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">What to validate as an OEM<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Focus on system behavior and testability, not whether a pack has a fan or a plate. You\u2019re trying to answer one question: <strong>will the pack stay inside its thermal envelope in your duty cycle?<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The specific validation evidence to request (thermal mapping, sensor coverage, and derating logic proof) is consolidated in the RFQ\/supplier scorecard checklist below.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the vehicle program is targeting fast charging, thermal design becomes non-negotiable. Fast charging simply turns the thermal problem into a performance problem faster\u2014because you\u2019re stacking charge heat on top of discharge heat.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">BMS behavior: how intelligence becomes usable power<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Even if the electrical and thermal design are both strong, the vehicle\u2019s usable performance is still defined by how the BMS manages those capabilities.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The BMS doesn\u2019t create battery performance, but it determines how much of the battery\u2019s real capability can actually be used.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Many OEM teams treat the BMS as a safety accessory. In reality, it\u2019s also the system that shapes everyday ride feel: how smoothly torque ramps, whether power fades suddenly near mid-SOC, and whether the bike protects itself without jarring cutoffs.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A practical distinction is <strong>entry-level vs advanced BMS capability<\/strong>. Entry-level BMS designs typically focus on core protection (voltage, current, temperature) and may use simpler balancing strategies and less robust SOC estimation, which can widen the gap between \u201cnameplate energy\u201d and what riders can actually use day-to-day. More advanced BMS implementations usually improve usable performance through tighter balancing control, better SOC accuracy across temperature and aging, and broader fault coverage with clearer event logs\u2014making both validation and field troubleshooting more repeatable.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For OEM teams, the point isn\u2019t which label the BMS falls under. It\u2019s whether the pack\u2019s usable envelope stays consistent enough to support stable calibration, predictable warranty outcomes, and fast root-cause analysis when something goes wrong in the field.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Current limits and derating logic<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Even if the cells can deliver the current, the BMS may cap it based on:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><p>cell voltage limits<\/p><\/li><li><p>temperature limits<\/p><\/li><li><p>pack component ratings (wiring, connector, fuse)<\/p><\/li><li><p>fault history or diagnostic flags<\/p><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">This matters because the motorcycle\u2019s delivered performance is not the cell\u2019s theoretical capability\u2014it\u2019s the BMS-approved operating envelope.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you want a simple baseline: the BMS watches cell voltage and temperature, estimates state, balances cells, and enforces current limits\u2014those rules are what your controller ultimately \u201csees.\u201d<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">SOC accuracy, balancing, and diagnostics<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Two issues often get mislabeled as \u201crange problems,\u201d when they\u2019re really system behavior:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><p><strong>SOC inaccuracy<\/strong> (early derating, unhappy riders)<\/p><\/li><li><p><strong>Imbalance and weak-cell behavior<\/strong> (one group hits cutoff early, the whole pack limits power)<\/p><\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">Balancing and state estimation directly affect usable energy, cutoff timing, and how stable performance stays over pack life.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In practice, a conservative or poorly-tuned BMS often shows up as rider complaints that sound \u201cnon-battery-related\u201d: jerky acceleration, sudden power cuts near mid-SOC, or an SOC gauge that drops in big steps instead of smoothly.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What to request for validation and field support<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">For MOFU buyers, one of the highest-signal questions is: <strong>Can the supplier support validation and field debugging without guesswork?<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Rather than duplicating request lists across sections, capture the required logs, reports, traceability, and process expectations once in the consolidated RFQ\/supplier scorecard checklist below and in the \u201cNext steps\u201d section at the end.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">1) Power delivery<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><p>Continuous discharge current at defined ambient and pack temperature<\/p><\/li><li><p>Peak discharge current with defined duration and recovery conditions<\/p><\/li><li><p>Voltage sag under defined pulse loads at multiple SOC points<\/p><\/li><li><p>DCIR method + distribution (measurement window\/pulse definition, SOC point, temperature control, and rest time) + distribution (min\/avg\/max or percentile spread)<\/p><\/li><li><p>Cutoff strategy: undervoltage thresholds and how they map to derating<\/p><\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">2) Thermal management<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><p>Temperature rise at continuous load (steady-state)<\/p><\/li><li><p>Module-to-module temperature delta under load (uniformity)<\/p><\/li><li><p>Cooling\/heating strategy and control logic<\/p><\/li><li><p>Sensor coverage (where temperatures are measured vs where hot spots form)<\/p><\/li>\n<\/ul>\n\n\n\n<blockquote class=\"wp-block-quote is-layout-flow wp-block-quote-is-layout-flow\"><p>If a supplier can\u2019t provide pack-level curves and thermal mapping under defined conditions, you\u2019re likely buying a \u201ccapacity number,\u201d not a validated power system.<\/p><\/blockquote>\n\n\n\n<h3 class=\"wp-block-heading\">3) BMS behavior<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><p>Discharge and charge current limit curves vs SOC and temperature<\/p><\/li><li><p>SOC\/SOH accuracy claims tied to method and validation evidence<\/p><\/li><li><p>Cell balancing method and thresholds<\/p><\/li><li><p>Diagnostics: what events are logged, and what the OEM can access<\/p><\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">4) Mechanical and environmental robustness<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><p>Vibration and shock test coverage relevant to two-wheel duty<\/p><\/li><li><p>Ingress protection assumptions (what is sealed, what is vented)<\/p><\/li><li><p>Connector and harness ratings (thermal and current)<\/p><\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">5) Documentation and compliance readiness<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><p>Transport compliance documentation (e.g., UN 38.3 where applicable)<\/p><\/li><li><p>Safety test evidence and what is certified at cell vs pack level<\/p><\/li><li><p>Revision control for pack design and firmware<\/p><\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Why better system design lowers warranty risk<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Capacity-heavy purchasing can look good on paper (price per kWh), but it often shifts risk into warranty and service when real-world derating and early degradation show up.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Better system-level design\u2014validated power delivery, thermal control, and BMS logic\u2014usually means fewer performance complaints and fewer pack swaps.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Battery performance is a system engineering problem<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">At sourcing time, it\u2019s tempting to evaluate cells, add up a pack, and call it \u201cperformance.\u201d In the vehicle, performance shows up as a chain of constraints:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Cell capability \u2192 pack electrical design \u2192 thermal behavior \u2192 BMS limits \u2192 vehicle calibration \u2192 rider-perceived performance<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That\u2019s why capacity isn\u2019t enough. A pack can look great in nameplate energy and still feel weak if voltage sag forces current limits, if temperature drives derating, or if the BMS has to protect the weakest cell group.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The better procurement question isn\u2019t \u201cHow many Ah?\u201d It\u2019s: How much validated performance can this battery system deliver throughout its service life?<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Next steps for OEMs: how to run a battery partner evaluation<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">If you\u2019re sourcing beyond \u201ccapacity on a label,\u201d the goal is to make supplier responses comparable and reduce downstream calibration and warranty risk.<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><p><strong>Define your duty cycle<\/strong> (peak power, sustained power, ambient extremes, charging behavior). A pack that \u201clooks good\u201d at low-rate capacity tests may fail your actual load profile.<\/p><\/li><li><p><strong>Use the RFQ\/supplier scorecard checklist<\/strong> to request the same pack-level curves, derating limits, and thermal evidence from every bidder\u2014under clearly defined conditions.<\/p><\/li><li><p><strong>Lock change control early<\/strong>: agree on pack revision control and BMS firmware versioning so performance evidence remains valid from pilot to SOP.<\/p><\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">A strong partner should be able to translate your duty cycle into measurable acceptance tests, deliver decision-grade evidence (not just cell datasheets), and support field debugging with clear logs and traceability as programs scale.<\/p>","protected":false},"excerpt":{"rendered":"<p>A MOFU OEM guide to evaluate e-motorcycle battery performance beyond capacity\u2014power delivery, thermal management, BMS behavior, and TCO inputs.<\/p>","protected":false},"author":3,"featured_media":9803,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[1,93],"tags":[],"class_list":["post-9804","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","category-low-speed-power"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.herewinpower.com\/ko\/wp-json\/wp\/v2\/posts\/9804","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.herewinpower.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.herewinpower.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.herewinpower.com\/ko\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.herewinpower.com\/ko\/wp-json\/wp\/v2\/comments?post=9804"}],"version-history":[{"count":0,"href":"https:\/\/www.herewinpower.com\/ko\/wp-json\/wp\/v2\/posts\/9804\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.herewinpower.com\/ko\/wp-json\/wp\/v2\/media\/9803"}],"wp:attachment":[{"href":"https:\/\/www.herewinpower.com\/ko\/wp-json\/wp\/v2\/media?parent=9804"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.herewinpower.com\/ko\/wp-json\/wp\/v2\/categories?post=9804"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.herewinpower.com\/ko\/wp-json\/wp\/v2\/tags?post=9804"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}